7/24 hours
Hotline
0577-62702999
中文版

> News > Company News

Application and characteristics of explosion-proof bolt device

2021-03-11

Explosion proof bolt device the bolt is composed of socket and plug, and the shell is made of high cast aluminum alloy. The plug is made of plastic resistant and four steel columns, and the plug barrel is fastened with the socket by an external thread sleeve. The socket is made of explosion-proof threaded copper sleeve, 4 copper parts and arc resistant plastic, and its cast aluminum alloy shell is equipped with 63A molded case circuit breaker with short-circuit overload protection function. The switch drives the internal control mechanism to rotate through the cylinder to realize opening and closing. The switch can only be in the "on" and "off" positions. The plug is interlocked with the switch. The switch can only be pulled out when it is turned in the opening position through the cylinder. Do not twist the cylinder at will, and the external equipment "do not open the cover with electricity"! Warning signs. Wire routing and cable clamp sealing connector.


How about the protection ability of the explosion-proof bolt device? The installation method of the explosion-proof bolt. The explosion-proof bolt is suitable for occasions with extremely bad external environmental conditions and has strong stability. The outer surface adopts sealed structure, which has the characteristics of dust-proof and waterproof. The company provides various types of explosion-proof bolts, which are directly supplied by manufacturers, with obvious price advantages.


Features of explosion-proof latch device:


1. Aluminum alloy shell is formed by die casting, with plastic sprayed surface and beautiful appearance


2. There are opening and closing instructions on the socket


3. The socket and plug are equipped with interlocking device, which can be plugged in and out after power failure


Application scope of explosion-proof latch device:


1. It has a slightly corrosive environment, but does not contain gases that seriously damage metal and insulation


2. Places that can prevent the immersion of hydrated liquid are dangerous places in zone 1 and zone 2


3. Class IIa, IIb and IIC explosive gas environment


4. Combustible dust environment zone 20, 21 and 22


5. The altitude shall not exceed 2000m


6. The ambient temperature shall not exceed + 40 ℃ and not be lower than - 20 ℃


7. The relative humidity of the surrounding environment shall not be greater than 95% (equivalent to + 25 ℃), which is applicable to class IIa and IIB T1 ~ T4 explosive gas mixture (zone 1 and zone 2)


Recommend

Hotline

0577-62702999

Telephone

0577-62702999

Wechat

Follow WeChat

TOP